Windows xp hard drive limit 2tb

Windows 7 is an easy switch. Windows 9 will be here in a few months. RAID volumes are inacceptable and ususable for truecrypt safes. I want to connect a HD to other computers anytime. Please, leave out special things which almost nobody cares for, leave out special scenarios which only RAID-freaks need. Eat that. If we can not even speak normally anymore and show our frustration, then, the fight for the good is lost and evil will win, haha, and nobody in the end will find that amusing but only truly me.

I already understand and have accepted the 2-TB limit, with XP. New York. Jerry, Going above 2TB requires both the operating system and the hardware be capable. On an old computer from , is it possible to split a 6TB drive into 2TB partitions and fill them with data using windows XP Pro x64 only? The cluster size simply needs to be changed from to Nothing else needs to be done. The only limitation is that it cannot be used as a boot drive.

Now there is technically a limit to what size a partition can be in bit windows. No partition can be over 2tb. So if you have a 10TB drive, you will need to split it up into 5 partitions.

Wampus Hunter Thanks for the cluster size info. When this post was originally written, GB was the largest drive size available and there were no third-party partition tools. But really, the best option now, is to switch to a modern operating system. Hey Carlton. I have been working on this problem for some time and even posted my problem everywhere but no one has a specific answer to me. Please help. I have a toshiba qosmio x w gaming laptop that runs windows 7 Ultimate I just upgraded since someone said it may help with my problem 64 bit.

I have two hard drive ports. The first one has a samsung 2 tb ssd. The second port is a samsung 4 tb ssd that I use for data only. But windows will not let me use all 4 tb.

I had it initialized and formatted to 4 tb. Windows, bios and samsung magician software all see it as 4 tb but when I try to use all 4 tb, the drive becomes unreadable and corrupted. I tried installing new copies of the files itune movies and tv shows by downloading it from itunes. Some background. My windows will not let me initialize or format it to 4 tb. I had to install the 4 tb ssd in another computer and have it do it. Then install the ssd back into my computer.

Now my windows sees it as 4 tb. But when adding files, it gets corrupted. I went to bios and there is not an option to switch it to uefi. I installed alllllll the updates. Bios and also the intel driver per the suggestion of some of these computer posts. Still I cannot use my full 4 tb. I did partition the 4 tb into 4 parts. But it gets corrupted or unreadable when I add more files to use the 4 tb.

What about the RAID? Any other software to try? You seem to have a solid understanding of drives and the way they work, so I wanted to present an idea here to get your thoughts on. Today you can buy 8TB hard drives. But what if you wanted a drive like this to be usable with an older system such as xp bit. I know proper drive recognition will be dependent on the bios as well as operating system. Assuming that the bios is good, would a bit operating system have an issue with an 8TB drive?

How about as a network drive? Windows XP bit can address the entire 6TB volume. But only if the hard drive controller on your motherboard is compatible. From , it probably is, but not definitely. A bios update to the motherboard may add the feature. All opinions are my own. XP was designed well before this barrier was approached and was not designed to exceed it. This support is not native to the operating system and can lead to reliability and data recovery issues.

Your best bet is to upgrade to a modern operating system. Mac OS X Linux requires kernel version 2. You must either delete everything and convert, but you might as well just create a new GPT partition at this point. To create GPT partitions, use the diskpart. The individual disks are not visible to the operating system but rather are controlled by a hardware RAID controller. A Volume Set set is presented to the operating system as a single, virtual disk drive.

Partitions are created by the Operating System and reside on top of Volume Sets. Volume Sets appear as virtual disk drives to the operating system. Right-click the label on the left for the disk that you want to convert, and then click Convert to GPT Disk. Now that the disk is initialized to access the full storage capacity, you must create a partition, and then format that partition by using a file system. Because the transition to a single-disk capacity of greater than 2 TB has occurred fairly recently, Microsoft has investigated how Windows supports these large disks.

The results reveal several issues that apply to all versions of Windows earlier than and including Windows 7 with Service Pack 1 and Windows Server R2 with Service Pack 1. To this point, the following incorrect behavior is known to occur when Windows handles single-disk storage capacity of greater than 2 TB:. The numeric capacity beyond 2 TB overflows.

It results in the system being able to address only the capacity beyond 2 TB. For example, on a 3-TB disk, the available capacity may be only 1 TB. The numeric capacity beyond 2 TB is truncated. It results in no more than 2 TB of addressable space. For example, on a 3-TB disk, the available capacity may be only 2 TB.

The storage device isn't detected correctly. In this case, it isn't displayed in either the Device Manager or Disk Management windows. Many storage controller manufacturers offer updated drivers that provide support for storage capacities of more than 2 TB. Contact your storage controller manufacturer or OEM to determine what downloadable support is available for single-disk capacities that are greater than 2 TB.

When a disk encounters errors that are related to unreadable or unwritable sectors, it reports those errors and the relevant SCSI sense data to the operating system. Therefore, the retrieved SCSI sense data either does not contain information about bad sectors or it contains incorrect information about bad sectors. Administrators should note this limitation when they look for bad sector LBA information that's recorded in the Windows event log.

Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Contents Exit focus mode. Please rate your experience Yes No. Any additional feedback? Note This article refers to disk capacity in powers of two instead of powers of 10, which is the more common designation on storage device capacity labels. Therefore, references to 2 TB actually refer to a product that is labeled as having 2. The operating system-specific behavior that is noted in this article also applies to the server variants of that system.

Note When a non-initialized disk is detected by Windows, the following window opens to prompt you to initialize the disk. Note If you select this option, this hard disk will not be recognized by Windows versions earlier than and including Windows XP. I don't know another method of checking partitions. I tried Windows "diskpart.

I'd like to "see" if it has more than one partition. However, I'm not clear as to whether this limit only applies to drives which must be bootable and maybe does not apply to drives used as storage only, as mine is. Now i want to ask, is my condition applies to 2TB limit. I want to put a 2 TB drive for only storage. Can anyone tell that if windows xp support it or not. Office Office Exchange Server. Not an IT pro? Sign in. United States English. Ask a question. Quick access. Search related threads.

Remove From My Forums. Answered by:.