Glass removal tool

The fastest and safest way to remove automotive glass. When used properly, it is the safest system out there that will not damage painted surfaces or interior trim panels. Its soft flexible cloth-like weaved fiber line is superior to typical wire cut out systems. By far this is the best in class "glass removal system. As experts in automotive repair, reconditioning and detail products we have a experience in developing, sourcing and supplying the best products for your needs.

Contact us at sales collisionrepairtools. Includes windshield support brackets to hold new windshields or use to hold damaged ones during chip repair. The most important reason is the fiber line that's used to do the "cutting. Overall, our kits are also simpler and more intuitive to use. We have a demo tutorial video that takes you through the system, step by step. You can easily watch it on a mobile device or at a desktop. Yes, just about every part that's used to build a WRDspider.

If you don't see it here online, just contact us and we will get you what you need. Get your amazingly compact glass removal system from WRDspider. Many of our customers have asked us for larger spools of this wire and that is the reason we have added a spool that contains more wire. This is the same wire that is shown above, but it is ' 50 meters long. As the square wires flat side is drawn against the urethane, it tilts and begins cutting with the V-corner of the wire.

This gives it a cutting ability that is superior to any wire in the world. Made of high tensile strength stainless steel. Try a roll and you will be amazed. It has a compact design measuring only The powerful 10 Amp motor drives the blade at up to 2, strokes per minute and will cut through the thickest of urethane with ease.

The Equalizer Ambush is designed to cut through the toughest urethane. A heavy-duty Volt motor provides the power to quickly remove the most difficult glass.

Ninja Pull Handle Learn More. Self-locking rubber gaskets are still used on many pieces of equipment and are used extensively in construction equipment. It can be difficult to fold the self-locking rubber into the locking part. Our locking tool works in two ways. First, it rolls the locking part over and second, the rounded tip on the tool forces the locking part into the receiver side of the rubber gasket. With a round steel ball on the end, this is the same tool as the MQ but with a small round steel ball on the end.

Once the steel ball is inserted down into the rubber gasket it is very difficult for it to come out. If it should slip out of the gasket there is less of a chance you will scratch the paint of the vehicle you are working on. This tool has been around the industry for perhaps 40 years.

It combines the two best methods for locking a self-locking rubber gasket. Of course, self-locking gaskets do not lock themselves, they need some help from you to fold the locking part into place. The curved pigtail end of the tool is most useful when the self-locking rubber is not very old and still a little stubborn. The straight end works great when the self-locking part goes into place easily.

Made of cast aluminum with steel ends. Each end is held in place by a hex screw and therefore easily removable if it becomes damaged. This handy tool is designed to ease the rope under the lip and seat it in the groove of the gasket. You will no longer have these problems with the rope insert tool. Comes with a sturdy rope that will reach around the largest rubber gasket.

Rubber gaskets are still being used on many vehicles, especially heavy construction equipment. Cleaning these gaskets have always been a problem but Equalizer has solved this with the rubber gasket cleaner.

To use the gasket cleaner, place the blade on the gasket and pull it toward you. The blade is sharpened on the end and on both sides so it will clean glass and old sealant out of the gasket with one easy pulling motion. The unique design of the RGC keeps your hands clear of the glass. Created for pulling rubber gaskets over pinchwelds for gasket set windshields.

The hook tool has been around the industry for fifty years and is an essential tool for any technician today. Made of hardened steel with a distinctive bent-then-curved end that helps reach over the pinchweld and easily grab the lip of the rubber.

Many technicians asked us for a hook tool with a narrower hook profile, we developed this tool for them. Great for reaching past the pinchweld and hooking the rubber gasket after the glass is almost installed. Made of hardened steel with chrome plating. One of the things most technicians do not have is a good set of fingernails. For that reason, it is often difficult for us to get a hold on an item that fits tight against another item.

We make tools that last and back them up with our Industry-Leading, no-hassle Ironclad Warranty. Lifetime or 3 Years on all tools.

Your search starts here! Experience the difference, browse our variety of windshield repair tools here. You can expect our tools to be your go-to each and every day, backed by the best warranty in the industry. Deterioration of glass surfaces is inevitable and is universal across all glass industries. Plastics and Acrylics are some of the most utilized materials in almost every industry across the globe.

Different from your typical tool brand, GT Tools offers the highest quality tools at a competitive price and a customer service experience that is unrivaled in the industry. GT Tools believes true innovation is created through building personal, long-term relationships with our customers. This allows us to understand the challenges they face and fuels creativity to solve problems and gain efficiencies in the industries we serve.